rice-method-cell-phone

How To Fix Water Damaged Cell Phones

Did you jump into the pool with your phone, leave it in the rain or accidentally dropped it in the toilet?

Don’t panic just yet, if you act fast, you can get your phone working properly again.

FixColorandMoreNashville offers you seven simple steps you can take to fix water damaged cell phones and bring it back to life.

 

  1. Disassemble the Phone

 

The first thing you need to do when your phone comes in contact with water is to disassemble the phone. You do this by removing any protective casing, removing the battery, SIM card(s) and microSD card.

 

  1. Dry the Phone Immediately

 

Wipe the phone gently with an absorbent towel. Take caution while doing this so as not to let any water get into the openings of your device if possible. Just take out as much water as possible focusing on the outside of the phone and any visible area.

 

  1. Use a vacuum cleaner

 

If perhaps the water damage is more extensive, try to dry it out with a vacuum cleaner. This will help to suck carefully out water stuck in cracks that are harder to get at. Make sure you exercise caution when doing this, try not to scratch the phone or hold the phone too close to the vacuum cleaner.

 

  1. Put the Phone in Rice

 

One of the common methods for drying phones is by using the uncooked rice method as rice is ideal for absorbing the liquid. All you have to do is to bury the phone in an airtight container or zip lock bag filled with uncooked rice. The rice will absorb the moisture and help to make dry the phone.

 

  1. Wait for 24-48 hours

 

Don’t be tempted to turn on the phone too soon to see if it still works. It is best you wait for 24-48 hours before attempting to turn your phone back on. The reason for this is to enable the moisture in the phone dry out completely.

 

  1. Check the phone

 

After one or two days of allowing the phone to dry, remove from rice container and check for any moisture that might still be in or on the device. If moisture remains evident, then do not re-insert the battery or accessories just yet. What you need to do is to continue the drying process with the advises above again until the phone is completely dry and moisture free.

 

  1. Turn on the phone

After waiting for 24-48 hours and you are sure there is no moisture on the phone, insert the battery into the phone and turn it on. If the phone doesn’t come on when attempting to power it, then plug your phone into a charger and see if you can get a response from the charger. This will help you to know if perhaps the battery was damaged or if it’s the phone itself.

You could try a replacement battery, or consider taking your phone to a cell phone water damage repair specialist like Fix Color And More Nashville to be checked by a professional.

 

Write a Comment

Your email address will not be published. Required fields are marked *